Sound Absorptions | Sound Absorption Suppliers

HOME |
SITEMAP

Polyester Info.
Polyester Info.
General
Characteristic
of T-MAX
GeneralCharacteristic
of T-MAX
Specifications
Specifications
T-Max Series
Specifications

> Product > T-MAX FOIL

T-Max Foil

Sound Absorptions

T-MAX FOIL developed to have the maximum heat insulation effect by treating the polyester and aluminum unharmful for the human body with special adhesion keeps the sound absorption efficiency for inner and outer wall of building as well as heat insulation and dampproofing. Also, it is a heat reflection material cutting the construction period and cost thanks to easy construction.

Cool summer

Warm winter

[Summer time]

[Winter time]

Features

Excellent heat insulation and freezing resistance.

Dew condensation-preventing effect in the inside of building.

Environmentally friendly material unharmful for the human body.

Non-ocurrence of innocuous gas by flame retardant material.

Easy for treatment and construction.

Best heat insulation with low cost.

Capable of recycling.

Use

Heat insulation in the building, housing, warehouse,
knockdown building, piping, and duct line.

All industrial facilities such as automobile, refrigerator
and freezer, boiler and drier.

All other industrial and building field needing heat
insulation.

Soundproof and heat insulation between the floors or
families.

Type and size

Item	Thickness	Size	Thermal Conductivity	Use	Strength
T-MAX FOIL	6mm	1m*50m (Roll)	0.029	Heat insulation of outer wall	Heat reflection, Heat insulation, Dampproofing, Sound absorption

Comparison table between T-MAX FOIL and Styrofoam

Classification

Styrofoam

T-MAX FOIL products

Execution cost

About 1/3 of Styrofoam execution cost

Product loss rate

15%

Workability

Customized by the size or cut on the site

- Necessary for the labor force and equip-
ment such as heat wire
- Occurrence of product loss
- Material treatment problem
- Weak in bolting after eleven o’clock in
winter

Easy treatment with cutting blade for the
stationery when it is cut according to the
necessary size, supplied in a roll type

-Zero loss by using the remains for the
other part
-Strong point because it is not affected by
the weather
-Favorable in corner construction

Thickness

20~100mm

6mm

Packaging unit

900*1800mm panel

Roll Type with Width 1m*Length 50mm

Characteristics

- Cracked or broken in compression
- Melting on bolting
- Outer skin congealing or getting rotten and
broken off

- Area in the inside of room increased by
reduction of wall thickness
- Whole thickness possible within 15mm with
“laminated paper” such as gypsum board
- Keeping the heat insulation effect in con-
crete cracking as the flexile material

T-Max FOIL Construction Drawing

Sound Absorptions

T-MAX FOIL Construction Map


Outer wall construction	Inner wall construction	Factory construction	Ceiling construction